top of page

1936 Citroen Traction Avant 11A

obj6623geo5490pg50p12.png

A completely new engine/gearbox cradle, front suspension assembly as well as front and rear brake hubs were required. Most of the parts were 3D printed from CAD drawings that I created.
 

For a complete version of the model's build history click on the button (56MB, 92pp)

Although these pictures don't show it, the model incorporates rack and pinion steering, a feature which was introduced in May 1936. A consequence of that change was that the front shock absorbers were moved to the front of the cradle.

IMG_0561Cmp.JPG

Although the engine and gearbox are very similar to the 7CV, the 11A has a wider radiator and wider cradle.

IMG_0543AssyDetailCmp.JPG

Underside showing the front suspension. The new scratch-built, adjustable shock absorbers were a last minute decision.

IMG_0660Cmp.JPG
IMG_0577TireCmp.JPG

The tire tread patterns are consistent with the 150 x 400 Michelin 'Stop' tires originally fitted to the 11A.

New brake hubs.
This one is for the rear.

IMG_0621Cmp.JPG
IMG_0553Cmp.JPG

Torsion bars, running back from the cradle, are part of the independent front suspension. They are anchored by a cross-beam attached to the sides of the engine bay.

IMG_0555Cmp.JPG

Rear axle, suspension, and brakes

IMG_0613Cmp.JPG

The fuel tank, with its hangers, and the exhaust system are scratch built. The two wire-wrapped steel handbrake cables are also clearly visible.

Suspension

IMG_0822Cmp.JPG
bottom of page